WINNER's distribution screen-Y series can be widely used in chemical, food and fragrance, plastics, mining, medicine, wood and plywood, metallurgy, rubber, feed, fertilizer, and recycling industries.

Features of Distribution Screen-Y:

Up to 5 times the output per unit area: it can be separated to six levels, and the screening efficiency is as high as 90-95%; the use of silicone rubber balls, ultrasonic and other cleaning device systems, the screen is not easy to be blocked, and the dust is airtight; the unique grid design , The screen has a long use time, and it only takes 3-5 minutes to change the screen; the screen parts have a long life and less maintenance; the noise is less than 75 decibels, the gravity balance is optimized, and the dynamic load of the foundation is low.

Principle of Distribution Screen-Y Structure:

1. The basic rotary motion is similar to manual screening. The eccentricity is adjustable from 25 to 40mm, and the low-speed V-belt drive is from 120 to 360rp. The residence time of each product can be adjusted in the direction of the drive axis through the radial and cutting angle of the distribution screen-Y.

2. Establish level and throw three-dimensional rolling motion. The material is evenly dispersed on the entire screen surface from the inside to the outer edge, so as to propagate axially in a spiral motion. The fine particles thus complete the entire screening process.

3. The horizontal and vertical acceleration increases with the movement of the particles, and the particles close to the mesh size are successfully separated; the larger particles are transported to the outlet, and the flow rate is controlled by an adjustable guide device at the outlet. Another factor that controls the residence time of materials. This process is repeated between each sieve layer.

WINNER shares distribution screen-Y series, a good helper for fine screening! For more details, Whats APP+86 13373745380!